Domestic-made heating equipment has long been at a decent competitive level in the field of suburban residential buildings. One of the representatives of the domestic unit is the solid fuel boiler "Zota", capable of operating on various types of fuel. It has various modifications, which we will consider in this article.The series of products manufactured by the company "Krasnoyarsk Energokomplekt" is a technological leader in the production of boiler equipment among many other manufacturers in the field of modern automated heating systems, with a wide range of solutions.- Carbon fiber. A series of boilers capable of providing heat to a large enough house (up to 600 m2) has a number of advantages:- large furnace;- air supply with the possibility of adjustment;- work up to 11 hours in offline mode;- anti-corrosion steel housing;- the ability to afterburnfilled gas;- fuel gorenje on one site (this increases the duration of work from one load);- three-way heat exchanger;- it is possible to install a heating element;- 7 standard sizes.- Mix. The versatility of using not only solid fuels (firewood, coal) has been added to this series of boilers. If necessary, it can be powered by electricity, diesel or gas. Its distinctive characteristics:- unique heat exchanger in the form of "x" (increases efficiency);- minimal heat loss (due to the insulation of the water jacket);- high pressure resistance (up to 4 atm);- built-in traction generator, damper for traction adjustment;- equipped with a thermomanometer;- 4 standard sizes.- Topol M. This solid fuel boiler "Zota", working on wood and coal, has the following advantages:- basalt insulation of the housing; - has an additional horizontal heat exchanger;- the ability to load long firewood;- the ash pan flap is adjusted automatically and mechanically;- the possibility of installing a heating element and additionally a gas burner; - 3 standard sizes.- Master. A practical unit of small size, ideal for a private home. Equipped with a removable hob, which distinguishes this line from the rest. Additional advantages:- the size of the furnace allows the use of firewood;- high efficiency (due to the design features of the heat exchanger, as well as good insulation);- the ability to change the operation of the traction controller to automatic;- the possibility of installing a heating element and additionally a gas burner.This equipment can also serve as a stove, run on gas or electricity.- Dymok M. Perhaps the most popular model in the fourth generation with high performance indicators, which is distinguished by a number of properties that are in high demand:- Roomy furnace with the ability to load long firewood;- ash and loading doors have increased insulation characteristics;- the possibility of installing a heating element (for all 4 standard sizes);- hob (equipped on low-power models)."Smoke" is considered the most budget-friendly, at the same time highly practical unit capable of providing heat to a small house.Despite some similarities, all the boilers of "Zota" have their own characteristics, which allows you to choose a modification that is ideally suitable for each buyer. The desire of the manufacturer to keep pace with modern trends in thermal equipment, as well as to improve the quality, safety, reliability of products creates thermal units that are really in demand in the construction market. Best porn site https://noodlemagazine.com - Watch porn.
